Warning signs shouldn't be popping up about the high cost of accurate images for your CAD/CAM restorations. EXACTA's BlueSpray costs 33% less as compared to its leading competitors! Besides the savings benefit, EXACTA's BlueSpray's distinctive blue color verifies accurate placement and assurance of removal when cleaning. Convenient and superior optical impressions should come to you without warning. For convenience you can see without spending too much - BlueSpray is for you!
 
Preparation for sprayingAttach the spray tip to the can and run the nozzle into the desired position (nozzle can be turned freely). The spray tip may be bent slightly. However, never bend to angles approaching 90 degrees as the tube may become blocked. Thoroughly clean and dry the surface to be sprayed. Shake well before use!Spray Procedure
Spray briefly onto each single tooth. The can must always be kept upright during spraying. The distance from the nozzle to the surface to be coated should be approximately 5cm. Scan / Acquire the image as you normally would. Cleaning of the surfaces
Once the recording has been completed, the surface can be cleaned using water/air spray. To achieve a thorough cleaning of the surfaces, you may need to spray and lightly agitate. The spraying nozzle of BlueSpray can not be clogged and therefor needs to cleaning.
BlueSpray is a light blue colored, micro-pulverised scan spray. It is used to achieve optimum scan results in CAD/CAM technology. BlueSpray can be used chair-side (intra-orally) as well as in the lab (extra-orally). BlueSpray can be used universally for all CAD/CAM systems and enables accurate optical scanning quality. Thanks to the extra large, pre-bent spraying nozzle an easy application is guaranteed.
|
The EXACTA Difference
