GreenFit is used to verify the interior adaptation of any restoration, but commonly used for CAD/CAM restorations.  Occlusal contacts are verified with articulating paper, yet there is no traditional way to verify the internal fit of a crown.

• Place a small amount of GreenFit on the interior of a crown and seat it on the prep prior to cementation. After 90 seconds, you can remove the crown and visually check for uniform fit consistency. Any dark spots indicate there is an uneven fit.

Color	Neon Green
Hardness (Shore A)	50 +/- 2
Working Time	30 +/- 5 sec.	at 73º
Set Time	90 sec.	at 98.6º
Consistancy	Type 3: light body consistancy	(ISO 4823)
Recovery from deformation	> 99.6%	(ISO 4823)
Maximum strain in compression	6.7%	(ISO 4823)
Linear dimension change	0.2%	(ISO 4823)